Piotrowski, Andrzej and Zaborski, Andrzej and Tyliszczak, Artur (2024) Computer-Aided Analysis of the Formation of the Deformation Zone in the Burnishing Process. Applied Sciences, 14 (3). p. 1062. ISSN 2076-3417
applsci-14-01062.pdf - Published Version
Download (30MB)
Abstract
The study presents the use of spatial imaging of the shape of the deformation formation area occurring at the point of contact between the burnished tool and the processed material surface in the burnishing process. In the analysis of changes in the shape of surfaces processed by ball and disc pressure burnishing, an integrated measurement station was used to measure surface stereometry (New Form Talysurf 2D/3D 120 by Taylor Hobson) and to carry out a series of axially shifted roundness measurements (Talyrond 365 by Taylor Hobson). The geometric parameters of the deformation zone determined in the direction of the circumference of the cylindrical surface (direction of the main movement) and in the axial direction (in the feed plane) are presented. The data obtained as a result of metrological measurements were analysed using specialized computer software.
Item Type: | Article |
---|---|
Subjects: | EP Archives > Multidisciplinary |
Depositing User: | Managing Editor |
Date Deposited: | 27 Jan 2024 06:02 |
Last Modified: | 27 Jan 2024 06:02 |
URI: | http://research.send4journal.com/id/eprint/3692 |