Evaluation of Heavy Metals in Soil Wastewater Stream

Environmental pollution is one of the main factors that significantly affect biological systems and human health. Soil pollution with heavy metals is an increasingly pressing problem worldwide. In general, heavy metals are stable and do not decompose, unlike other organic pollutants. The quantity of them is natural components of soil crust, the remaining come from human activities, which may result from the extensive use of sewage. In the present study, a methodology aimed at simultaneous quantification of 16 heavy elements in soil of 3 different regions was developed. The concentration of 16 soil heavy metals (Se, Cd, V, Be, As, Mn, Co, Zn, Fe, Cr, Pb, Ni, Cu, Mo, Hg, and Ti) was measured in 11 sampling along Riyadh, Qassim, and Medina, Kingdom of Saudi Arabia from 3 sites soil treated with sewage water. These chemical minerals were identified in the samples using an ICPE-9000 spectrometer. The assessment of heavy metal contamination was derived using enrichment factors (EF), the pollution load index (PLI), and geoaccumulation index (Igeo). This study revealed that the soil is predominantly polluted by Cd, As, and Mo of Riyadh and Medina and As, Mo, and Cd of Qassim region at site B and site C, respectively. As recorded, the highest concentration value of 5000 mg/kg for Fe at site (B) followed by Cu. The Igeo value of Cd is 1.1520 in Medina region. The Igeo value of Se is 3.2395 in Medina region, while its cumulative geographical index decreased in the regions of Riyadh and Qassim, which amounted to 2.6114 and 2.1699, respectively. The Igeo values of the rest of the minerals in the three regions studied indicated that the soil is unpolluted, while it was slightly to moderately polluted for both Mo and Hg in most regions studied. The minerals in the soil at all sites studied were less than the general average concentration. With the exception of mercury, molybdenum, arsenic, cadmium, and selenium, whose concentration exceeded the permissible and recommended limits. The increasing order of concentration of minerals was Be < V < Cd < Hg < Mo < Co < Zn < Pb < Cr < Se < As < Ni < Ti < Mn < Cu < Fe at all sites, respectively.