Items where Subject is "Engineering"

Article

., Kalu J and ., Nwauzor J.N and ., Suleman K.O and ., Igbo M. E and ., Igbo N. E (2024) Examining the Geometrical Properties, Chemical Composition, and Mechanical Properties of Local Reinforcing Bars in Ghana. Journal of Engineering Research and Reports, 26 (6). pp. 212-222.

Abed, Foud Nihad and Abdulridha, Mustafa Mahdi and Mohamad, A. A. Hamad and Meraf, Zelalem and Abdelhedi, Mohamed and Rehman, Rabia (2022) Synthesis and Use of Environmentally Friendly Superabsorbent Smart Polymer to Improve the Properties of the Gypsum Soil. Adsorption Science & Technology, 2022. pp. 1-7. ISSN 0263-6174

Adejumobi, M. A. and Ojediran, J. O. and Onofua, O. E. (2022) Impact of Irrigation Practices on Soil Physicochemical Properties of Josepdam Irrigation Scheme. Journal of Engineering Research and Reports, 23 (2). pp. 29-39. ISSN 2582-2926

Aggarwal, Riya and Lamichhane, Bishnu P. and Meylan, Michael H. and Wensrich, Chris M. (2021) An Investigation of Radial Basis Function Method for Strain Reconstruction by Energy-Resolved Neutron Imaging. Applied Sciences, 11 (1). p. 391. ISSN 2076-3417

Alevanau, Aliaksandr Yurievich and Vyhoniailo, Oleksandr Ivanovych and Kuznechik, Olgerd Pavlovich and Jönsson, Pär and Ersson, Mikael and Kantarelis, Efthymios (2018) Mechanically Assisted Low-Temperature Pyrolysis of Hydrocarbons. Energy and Power Engineering, 10 (04). pp. 133-153. ISSN 1949-243X

Ameli, Alireza and Babagoli, Rezvan and Petrella, Andrea (2021) Evaluation of the Influence of Antistripping Agents on Water Sensitivity of the Stone Matrix Asphalt Mixture Modified by Recycled Ground Tire Rubber and Waste Polyethylene Terephthalate. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Arnob, Fahim Faisal and Anwar, Md Sayed and Islam, Md Shariful and Arifuzzaman, Md and Bari, Md Abdullah Al (2023) Negative stiffness honeycomb structure as automobile leaf spring: A numerical investigation. Engineering Solid Mechanics, 11 (4). pp. 389-400. ISSN 22918744

Asanu, Mohammed and Beyene, Dejene and Befekadu, Adisu and Oueslati, Walid (2022) Removal of Hexavalent Chromium from Aqueous Solutions Using Natural Zeolite Coated with Magnetic Nanoparticles: Optimization, Kinetics, and Equilibrium Studies. Adsorption Science & Technology, 2022. pp. 1-22. ISSN 0263-6174

Ayele, Million and Limeneh, Derseh Yilie and Tesfaye, Tamrat and Mengie, Wassie and Abuhay, Amare and Haile, Adane and Gebino, Gemeda and Santulli, Carlo (2021) A Review on Utilization Routes of the Leather Industry Biomass. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Balcha Balla, Tamrat and MaryJoseph, Nisha and Belete, Anteneh and Caggiano, Antonio (2021) In Vitro Evaluation of Native Taro Boloso-I Starch as a Disintegrant in Tablet Formulations. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Barato, Francesco (2021) Challenges of Ablatively Cooled Hybrid Rockets for Satellites or Upper Stages. Aerospace, 8 (7). p. 190. ISSN 2226-4310

Barile, Claudia and Casavola, Caterina and Pappalettera, Giovanni and Vimalathithan, Paramsamy Kannan (2021) Multiparameter Approach for Damage Propagation Analysis in Fiber-Reinforced Polymer Composites. Applied Sciences, 11 (1). p. 393. ISSN 2076-3417

Bhide, Kalyani and Siddappaji, Kiran and Abdallah, Shaaban (2021) Aspect Ratio Driven Relationship between Nozzle Internal Flow and Supersonic Jet Mixing. Aerospace, 8 (3). p. 78. ISSN 2226-4310

Bianco, Maria Giovanna and Pullano, Salvatore Andrea and Citraro, Rita and Russo, Emilio and De Sarro, Giovambattista and de Villers Sidani, Etienne and Fiorillo, Antonino S. (2020) Neural Modulation of the Primary Auditory Cortex by Intracortical Microstimulation with a Bio-Inspired Electronic System. Bioengineering, 7 (1). p. 23. ISSN 2306-5354

Bokov, Dmitry and Turki Jalil, Abduladheem and Chupradit, Supat and Suksatan, Wanich and Javed Ansari, Mohammad and Shewael, Iman H. and Valiev, Gabdrakhman H. and Kianfar, Ehsan and Wang, Zhongchang (2021) Nanomaterial by Sol-Gel Method: Synthesis and Application. Advances in Materials Science and Engineering, 2021. pp. 1-21. ISSN 1687-8434

Campos, Luís M. B. C. and Marques, Joaquim M. G. (2021) On the Handling Qualities of Two Flying Wing Aircraft Configurations. Aerospace, 8 (3). p. 77. ISSN 2226-4310

Cao, Xiaobin and Feng, Wenyan and Yang, Lin and Zhang, Yu (2018) Study on the Influence of Grounding Conductor Structure on Its Grounding Impedance Spectrum Response. Energy and Power Engineering, 10 (04). pp. 11-16. ISSN 1949-243X

Cao, Xiaobin and Li, Zhongmei and Yao, Shiwei (2018) Analysis on the Phase Frequency Characteristic of Soil Impedance. Energy and Power Engineering, 10 (04). pp. 17-24. ISSN 1949-243X

Capece, Angela and De Fusco, Deborah and Pietrafesa, Rocchina and Siesto, Gabriella and Romano, Patrizia (2021) Performance of Wild Non-Conventional Yeasts in Fermentation of Wort Based on Different Malt Extracts to Select Novel Starters for Low-Alcohol Beers. Applied Sciences, 11 (2). p. 801. ISSN 2076-3417

Castanheira-Pinto, Alexandre and Gonçalves, Bruno S. and Lima, Rui M. and Dinis-Carvalho, José (2021) Modeling, Assessment and Design of an Emergency Department of a Public Hospital through Discrete-Event Simulation. Applied Sciences, 11 (2). p. 805. ISSN 2076-3417

Chahrour, Mutaz K. and Hosen, Md. Akter and Goh, Yingxin and Tong, Teong Yen and Yap, Soon Poh and Khadimallah, Mohamed Amine and De Jesus, Abílio (2021) Failure Mechanisms of Structural Bamboo Using Microstructural Analyses. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Chen, Xiaojuan and Deng, Huiwen (2021) Research on Personalized Recommendation Methods for Online Video Learning Resources. Applied Sciences, 11 (2). p. 804. ISSN 2076-3417

Choi, Beom-Rak and Cho, Il-Je and Jung, Su-Jin and Kim, Jae-Kwang and Lee, Dae-Geon and Ku, Sae-Kwang and Park, Ki-Moon (2021) Lemon Balm and Dandelion Leaf Extracts Synergistically Protect against Carbon Tetrachloride-Induced Acute Liver Injury in Mice. Applied Sciences, 11 (1). p. 390. ISSN 2076-3417

D. Kumawit, Allen Jay and A. Mendoza, Mariane (2022) Redesigned Chuck Table: Deep-grooved Chuck Table for Higher Vacuum Suction of Singulated Package. Journal of Engineering Research and Reports, 23 (2). pp. 1-6. ISSN 2582-2926

Danlami, Babalola Abayomi and Esther, Babalola Toju and Bello, Aliyu Abdulaziz (2024) The Effect of Extreme Temperature and Air Pollutant on Cardiovascular Disease in Ondo-State Nigeria. Journal of Engineering Research and Reports, 26 (2). pp. 194-214. ISSN 2582-2926

Dimaki, Andrey V. (2020) Theoretical Study of Fretting Wear Rate Evolution in Axi-Symmetrical Elastic Contact Using the Method of Dimensionality Reduction. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Ding, Zude and Liao, Mingrong and Xiao, Nanrun and Li, Xiaoqin and de Oliveira Correia, José António Fonseca (2021) Numerical Analysis of the Seismic Response of Tunnel Composite Lining Structures across an Active Fault. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Dölle, Klaus (2023) Enhancement of a Decentralized Wastewater Treatment System by Applying a Bio-tower - A Project for Improving our Environmental Footprint. Journal of Engineering Research and Reports, 25 (4). pp. 24-41. ISSN 2582-2926

Dölle, Klaus and Fritz, Malina (2022) Study of Treating Wastewater with a Laboratory Benchtop Septic Systems. Journal of Engineering Research and Reports, 23 (12). pp. 321-327. ISSN 2582-2926

Fang, Yanfei and Ma, Liran and Wang, Xianzhang and Luo, Jianbin (2020) Numerical Model for Hydration-Lubricated Contact and Its Friction Behavior at Nanoscale. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Ge, Wenyi and Wang, Zhitao and Wang, Guigui and Tan, Shihan and Zhang, Jianwei (2021) Remote Sensing Image Super-Resolution for the Visual System of a Flight Simulator: Dataset and Baseline. Aerospace, 8 (3). p. 76. ISSN 2226-4310

Haikal Mohd Ghazali, Mohd Fahmi and Mohd Hasan, Mohd Rosli and Seman, Anasyida Abu and Dorett, Dillon Dipagk and Mukhtar, Najib and Jaya, Ramadhansyah Putra and Heidarzadeh, Akbar (2021) A Review of Asphaltic Crack Healing Approaches and Its Mechanism. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Idowu, Ifedotun Roseline and Adeniji, Oluwashola David and Okewale, Kayode and Alabi, Falilat Adesola (2022) Detection of Cyberbullying in the Social Media Space using Maximum Entropy and Convolutional Neural Network. Journal of Engineering Research and Reports, 23 (2). pp. 40-48. ISSN 2582-2926

Iqbal, J. L. Mazher and Kishore, Munagapati Siva and Arulkumaran Ganeshan, . and Narayan, G. and Chelladurai, Samson Jerold Samuel (2021) Design and Implementation of SOC-Based Noncontact-Type Level Sensing for Conductive and Nonconductive Liquids. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Ji, Yanjie and Li, Xu and Wang, Wei and Liu, Li and Yuan, Bingxiang (2021) The Equilibrium Time and Salt Expansion Characteristic of Sulfate Saline Soil upon Cooling. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Jiahao, Feng and Pengyan, Guo and Cunwu, He and Chengwei, Liu (2024) Parametric Analysis on Formability of SS304 Metal Bipolar Plate with Wave Flow Field Structure. Journal of Engineering Research and Reports, 26 (1). pp. 62-78. ISSN 2582-2926

Jo, Bang-Hyun and Jang, Dae-Sung and Hwang, Jai-Hyuk and Choi, Yong-Hoon (2021) Experimental Validation for the Performance of MR Damper Aircraft Landing Gear. Aerospace, 8 (9). p. 272. ISSN 2226-4310

Kim, Taewan and Seo, Ki-Young and Kang, Choonghyun and Lee, Tak-Kee (2021) Development of Eco-Friendly Cement Using a Calcium Sulfoaluminate Expansive Agent Blended with Slag and Silica Fume. Applied Sciences, 11 (1). p. 394. ISSN 2076-3417

Koller, Martin (2020) Advances in Polyhydroxyalkanoate (PHA) Production, Volume 2. Bioengineering, 7 (1). p. 24. ISSN 2306-5354

Krorakai, Karnpimon and Klangphukhiew, Supannika and Kulchat, Sirinan and Patramanon, Rina (2021) Smartphone-Based NFC Potentiostat for Wireless Electrochemical Sensing. Applied Sciences, 11 (1). p. 392. ISSN 2076-3417

Kumar Panda, Pradeep and Jebastine, J. and Ramarao, Madhialagan and Fairooz, Shaik and Reddy, Chirra Kesava and Nasif, Omaima and Alfarraj, Saleh and Manikandan, Velu and Jenish, I. and Ganeshan, P (2021) Exploration on Mechanical Behaviours of Hyacinth Fibre Particles Reinforced Polymer Matrix-Based Hybrid Composites for Electronic Applications. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Las-Heras-Casas, Jesús and López-Ochoa, Luis M. and López-González, Luis M. and Olasolo-Alonso, Pablo (2021) Energy Renovation of Residential Buildings in Hot and Temperate Mediterranean Zones Using Optimized Thermal Envelope Insulation Thicknesses: The Case of Spain. Applied Sciences, 11 (1). p. 370. ISSN 2076-3417

Li, Yan and Luo, Yasheng and Hu, Songtao and Gao, Jianglin and Wang, Chaojie and Cai, Xin (2021) Effect of Alkali Seepage Erosion on Physical and Mechanical Properties of Laterite. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Liu, Keming and Sun, Xizhen and Cai, Xin (2021) Bearing Capacity of Concrete Filled Steel Tube Circular Arch under the Six-Point Uniformly Distributed Loading and Its Engineering Application. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Lv, Jianbing and Huang, Juan and Wu, Hao and Zhang, Yang and Qiu, Jingyu and Sun, Xiaolong and Yin, Yingmei and Sun, Xiaoli and Jingjing, Meng (2021) Experience Study on Long-Life Microsurfacing with High Water Resistance Performance. Advances in Materials Science and Engineering, 2021. pp. 1-5. ISSN 1687-8434

Marongiu, Giuseppe and Contini, Andrea and Cozzi Lepri, Andrea and Donadu, Matthew and Verona, Marco and Capone, Antonio (2020) The Treatment of Acute Diaphyseal Long-bones Fractures with Orthobiologics and Pharmacological Interventions for Bone Healing Enhancement: A Systematic Review of Clinical Evidence. Bioengineering, 7 (1). p. 22. ISSN 2306-5354

Ming, Zhang and Guozhou, Chen and Yang, Liu and Shouhai, Huang and yuan, Bingxiang (2021) Experimental Study on the Mechanical Property of Loess Mixed with Bentonite-HDTMA. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Mirzaei, Mahta and Okoro, Oseweuba Valentine and Nie, Lei and Petri, Denise Freitas Siqueira and Shavandi, Amin (2021) Protein-Based 3D Biofabrication of Biomaterials. Bioengineering, 8 (4). p. 48. ISSN 2306-5354

Montes, Enrique and Vázquez, Héctor (2021) Role of the Binding Motifs in the Energy Level Alignment and Conductance of Amine-Gold Linked Molecular Junctions within DFT and DFT + Σ. Applied Sciences, 11 (2). p. 802. ISSN 2076-3417

Nabil, Mahmoud and Perez-Quintana, I. V. and Acosta, M. and Mendez-Gamboa, J. A. and Castro-Rodriguez, R. and Kandel, Hom (2021) Morphological, Structural, and Optical Bandgap Characterization of Extracted ZnO Nanoparticles from Commercial Paste. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Nakayama, Naoki and Ravuri, Sudheer and Huard, Johnny (2021) Rejuvenated Stem/Progenitor Cells for Cartilage Repair Using the Pluripotent Stem Cell Technology. Bioengineering, 8 (4). p. 46. ISSN 2306-5354

Nijjar, Sumit and Sudhakara, P. and Sharma, Shubham and Saini, Sanjeev and Teklemariam, Aklilu and Mariselvam, V. and Sampath, Satheesh Kumar and Song, J. I. and Vijayan, V. (2021) Influence of Alkali Treatment and Maleated Polypropylene (MAPP) Compatibilizer on the Dry-Sliding Wear and Frictional Behavior of Borassus Fruit Fine Fiber (BFF)/Polypropylene (PP) Polymer Composites for Various Engineering Applications. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Nosoudi, Nasim and Oommen, Anson Jacob and Stultz, Savannah and Jordan, Micah and Aldabel, Seba and Hohne, Chandra and Mosser, James and Archacki, Bailey and Turner, Alliah and Turner, Paul (2020) Electrospinning Live Cells Using Gelatin and Pullulan. Bioengineering, 7 (1). p. 21. ISSN 2306-5354

Nota, Alessandro and Ryakhovsky, Alexander N. and Bosco, Floriana and Tecco, Simona (2021) A Full Digital Workflow to Design and Mill a Splint for a Patient with Temporomandibular Joint Disorder. Applied Sciences, 11 (1). p. 372. ISSN 2076-3417

Nyberg, Erik and Llopart i Cervelló, Dídac and Minami, Ichiro (2021) Tribology in Space Robotic Actuators: Experimental Method for Evaluation and Analysis of Gearboxes. Aerospace, 8 (3). p. 75. ISSN 2226-4310

Oluwatoyin, Kadiri, Kamoru and Jamiu, Adekanye Majeed and Abdulsalam, Adewuyi Olaitan (2022) Development of an Intelligent Smart Hub Renewable Generation System (ISHRGS) for both Urban and Rural Centres in Offa, Kwara State. Journal of Engineering Research and Reports, 23 (2). pp. 7-18. ISSN 2582-2926

Pandey, Prashant Kumar and Rathi, Rajeev and Singh, Mahipal and Verma, Jagesvar (2023) Experimental analysis on microstructure, mechanical properties, and corrosion behavior of TIG welded AISI 444 ferritic stainless steels. Engineering Solid Mechanics, 12 (1). pp. 93-102. ISSN 22918744

Papakonstantinou, Charalampos and Lappas, Vaios and Kostopoulos, Vassilis (2021) A Gimballed Control Moment Gyroscope Cluster Design for Spacecraft Attitude Control. Aerospace, 8 (9). p. 273. ISSN 2226-4310

Peng, Chenyuan and Zhang, Jin and Yan, Bing and Luo, Yazhong (2021) Multisatellite Flyby Inspection Trajectory Optimization Based on Constraint Repairing. Aerospace, 8 (9). p. 274. ISSN 2226-4310

Pohrt, Roman (2020) Friction Influenced by Vibrations: A Refined Contact-Mechanics View on Lateral and Rotational Oscillations. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Porta, Micaela and Pau, Massimiliano and Leban, Bruno and Deidda, Michela and Sorrentino, Marco and Arippa, Federico and Marongiu, Giuseppe (2021) Lower Limb Kinematics in Individuals with Hip Osteoarthritis during Gait: A Focus on Adaptative Strategies and Interlimb Symmetry. Bioengineering, 8 (4). p. 47. ISSN 2306-5354

Rousseau, Jean-Jacques and Chatelon, Jean Pierre and Nimir, Yacoub Nassian and Taha, Mahamat Ahmat and Dari, Yaya Dagal and Béchir, Mahamat Hassan and Kriga, Adoum and Mahamat, B. Mahamout and Allassem, Désiré (2022) Comparative Study of Four-Point Measurements of Copper Thin Films Resistivity in Aligned and Square Configuration at Low Frequencies. Journal of Engineering Research and Reports, 23 (11). pp. 6-15. ISSN 2582-2926

Saeedi, Farshad and Moradi, Gholam and Roustaei, Saeed and Dashti, Saba (2023) Dimensional Specifications and Resistance Characteristics of Olive Marl Masonry for Reinforcement and Stabilization of Excavations and Road Structures. Journal of Engineering Research and Reports, 25 (9). pp. 186-195. ISSN 2582-2926

Shaffaf, Tina and Ghafar-Zadeh, Ebrahim (2021) COVID-19 Diagnostic Strategies. Part I: Nucleic Acid-Based Technologies. Bioengineering, 8 (4). p. 49. ISSN 2306-5354

Shi, Xinxin and Bao, Guangqing and Ding, Kun and Lu, Liang (2018) Multi-Objective Optimal Dispatch Considering Wind Power and Interactive Load for Power System. Energy and Power Engineering, 10 (04). pp. 1-10. ISSN 1949-243X

Stesina, Fabrizio (2021) Tracking Model Predictive Control for Docking Maneuvers of a CubeSat with a Big Spacecraft. Aerospace, 8 (8). p. 197. ISSN 2226-4310

Sun, Li and Feng, Xindi (2022) Application Progress of Artificial Neural Network in Chemical Industry. Journal of Engineering Research and Reports, 23 (7). pp. 26-36. ISSN 2582-2926

Svotina, Victoria V. and Mogulkin, Andrey I. and Kupreeva, Alexandra Y. (2021) Ion Source—Thermal and Thermomechanical Simulation. Aerospace, 8 (7). p. 189. ISSN 2226-4310

Swinney, Carolyn J. and Woods, John C. (2021) Unmanned Aerial Vehicle Operating Mode Classification Using Deep Residual Learning Feature Extraction. Aerospace, 8 (3). p. 79. ISSN 2226-4310

Tan, Xingyi and Xu, Gang and Jiang, Youchang and Ren, Dahua and Giannopoulos, Georgios I. (2021) Bipolar Magnetic and Thermospin Transport Properties of Graphene Nanoribbons with Zigzag and Klein Edges. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Thangudu, Suresh and Kalluru, Poliraju and Vankayala, Raviraj (2020) Preparation, Cytotoxicity, and In Vitro Bioimaging of Water Soluble and Highly Fluorescent Palladium Nanoclusters. Bioengineering, 7 (1). p. 20. ISSN 2306-5354

Ugalde-Salas, Pablo and Ramírez C., Héctor and Harmand, Jérôme and Desmond-Le Quéméner, Elie (2021) Microbial Interactions as Drivers of a Nitrification Process in a Chemostat. Bioengineering, 8 (3). p. 31. ISSN 2306-5354

Velmurugan, G. and Siva Shankar, V. and Natrayan, L. and Sekar, S. and Patil, Pravin P. and Kumar, M. Senthil and Thanappan, Subash and Modigunta, Jeevan Kumar Reddy (2022) Multiresponse Optimization of Mechanical and Physical Adsorption Properties of Activated Natural Fibers Hybrid Composites. Adsorption Science & Technology, 2022. pp. 1-16. ISSN 0263-6174

Wang, Zhan and Li, Dongzheng and Wang, Zinan and Liu, Aoxiang and Tao, Ruiyao and Giannopoulos, Georgios I. (2021) Research on Dynamic Balance of Spindle Rotor System Based on Particle Swarm Optimization. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Wu, Pey-Shiuan and Lin, Chia-Hui and Kuo, Yi-Ching and Lin, Chih-Chien and Catauro, Michelina (2021) Preparation and Characterization of Organic/Inorganic Composite UV Filter Microcapsules by Sol-Gel Method. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Xin, Gongfeng and Zhang, Anshun and Wang, Zijian and Shen, Quanjun and Mu, Minghao and De Jesus, Abílio (2021) Influence of Humidity State on Dynamic Resilient Modulus of Subgrade Soils: Considering Repeated Wetting-Drying Cycles. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Xing, Wang and Kuo, Lu and Haitao, Xu (2022) Review of Magnetic Fluids and their Applications to Vibration Reduction. Journal of Engineering Research and Reports, 23 (10). pp. 1-12. ISSN 2582-2926

Yamazaki, Masafumi and Jemcov, Aleksandar and Sakaue, Hirotaka (2021) A Review on the Current Status of Icing Physics and Mitigation in Aviation. Aerospace, 8 (7). p. 188. ISSN 2226-4310

Zhang, Bin-Long and Wang, Da-Yan and Zhou, Zhi-Wei and Ma, Wei and Lei, Le-Le and Moayedi, Hossein (2021) The Effect of Temperature on Dynamic Characteristics of Frozen Clay under Principal Stress Rotation. Advances in Materials Science and Engineering, 2021. pp. 1-16. ISSN 1687-8434

Zhang, Binglong and Liu, He and Li, Yangyang and Liu, Hui and Dong, Jinzhong (2021) Experimental Study of Coaxial Jets Mixing Enhancement Using Synthetic Jets. Applied Sciences, 11 (2). p. 803. ISSN 2076-3417

Zhang, Feng and Gong, Shengping and Baoyin, Hexi (2021) Three-Axes Attitude Control of Solar Sail Based on Shape Variation of Booms. Aerospace, 8 (8). p. 198. ISSN 2226-4310

Zhang, Hao and Hu, Zaiqiang and Chen, Xingzhou and Li, Hongru and yuan, Bingxiang (2021) Formation Mechanism and Stability Analysis of the Hejia Landslide. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Zhang, Shengjun and Cheng, Xu and Shen, Feng (2018) Condensation Heat Transfer with Non-Condensable Gas on a Vertical Tube. Energy and Power Engineering, 10 (04). pp. 25-34. ISSN 1949-243X

Zhang, Shirui and Qiu, Shili and Li, Ping and Kou, Yongyuan and Kou, Pengfei and Riccio, Aniello (2021) Study on the Effect of Amygdales on Mechanical Characteristics of Basalt Using the Combined Finite-Discrete Element Method. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Zhang, Xunying and Zhao, Yafei (2022) Research on Fuzzy Control System of Intelligent Irrigation Based on Soil Moisture. Journal of Engineering Research and Reports, 23 (2). pp. 19-28. ISSN 2582-2926

Zhao, Bingchao and Ma, Yunxiang and Guo, Yaxin and Sun, Hao and Wang, Jingbin and Wang, Hailong and Rambo, Carlos R. (2021) Study and Application of Similar Material Ratio in Collapsible Loess. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Zhao, Xiaohong and Yan, Xianguo and Chen, Zhi and Su, Hang and Kara, Fuat (2021) Lightweight Design and Dynamics Analysis of ZYL-15000D Directional Drill Reducer. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Book Section

Agbakwuru, Jasper Ahamefula and Idubor, Fabian Ifeanyi (2022) Features and Resource Potential of the Atlantic Ocean in Nigeria. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 150-168. ISBN 978-93-5547-989-1

Ahmad, Md. Masood and Anitha, D. (2022) Leakage Current Analysis in Mosfets Using Matlab GUI. In: Techniques and Innovation in Engineering Research Vol. 2. B P International, pp. 29-42. ISBN 978-93-5547-880-1

Ahmad, Md. Masood and Anitha, D. (2022) Threshold Voltage and Source to Body Voltage Analysis in Mosfets. In: Techniques and Innovation in Engineering Research Vol. 2. B P International, pp. 11-28. ISBN 978-93-5547-880-1

Al-Ghamdi, S. A. and Abo-Dief, H. and Mohamed, A. T. (2021) Polymer/steel Tribological Characteristics and Corrosion and Under External Voltages. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 8-21. ISBN 978-93-90888-54-2

Alshorman, Abdullah A. (2021) Investigation of PEM Fuel Cell for Performance Augmentation: A Numerical Modeling Based Study. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 126-142. ISBN 978-93-91215-89-7

Bhagawati, Nabaratna (2023) Construction of Exactly Solvable Potentials from Romanovski Polynomials. In: Current Perspective to Physical Science Research Vol. 1. B P International (a part of SCIENCEDOMAIN International), pp. 133-141. ISBN Prof. Abbas Mohammed Current Perspective to Physical Science Research Vol. 1 09 20 2023 09 20 2023 9788119761647 B P International (a part of SCIENCEDOMAIN International) 10.9734/bpi/cppsr/v1 https://stm.bookpi.org/CPPSR-V1/issue/view/1186

Chanagala, Satyanarayana and Kanduri, Madhu Sudhana Rao (2021) Determination of Correlation and Relative Intensity Noise of the Chaos and the Message Masked by the Chaos. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 38-47. ISBN 978-93-5547-064-5

Chandu, Kavitha and Nettem, Adithya Valli (2022) Analysis of NLFM Signals against the Doppler Effect and Background Noise. In: Techniques and Innovation in Engineering Research Vol. 2. B P International, pp. 1-10. ISBN 978-93-5547-880-1

Chauhan, Yukta (2021) Economic and Easy Do it yourself (DIY) Safety Kit: An Advance Study. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 1-4. ISBN 978-93-91473-55-6

Coulibaly, Vamoussa and Sei, Joseph and Koffi, Léon Konan and Oyetola, Samuel and Jdid, El-Aïd and Thomas, Fabien (2020) Focusing on the Mineralogical and Chemical Characteristics of Clays Consumed in the District of Abidjan (Côte D’Ivoire). In: Emerging Trends in Engineering Research and Technology Vol. 11. B P International, pp. 1-15. ISBN 978-93-90431-76-2

Cuong, Le Dinh Phu and Wang, Dong and Hoang, Duyen The and Uyen, Le Mai Nhu (2021) Recent Study on Breast Cancer Prediction Based on Deep Neural Network Model Implemented AWS Machine Learning Platform. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 22-32. ISBN 978-93-90888-54-2

Duraisamy, M. and Logeswari, T. (2020) Brain Tumor Image Segmentation Using Ant Colony Optimization Technique. In: Emerging Trends in Engineering Research and Technology Vol. 9. B P International, pp. 153-165. ISBN 978-93-90206-37-7

Gao, Zunhai and Chen, Zhuo (2021) Model Reduction Method based on Rational Canonical Form of System Matrix and Krylov Subspace: A Scientific Explanation. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 112-118. ISBN 978-93-90888-73-3

Goswami, Mrinmoy and Ghosh, Ranajit and Meikap, Ajit Kumar (2021) Synthesis, Optical and Electrical Properties of PANI-MWCNT-ZnS Nanocomposites. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 1-7. ISBN 978-93-90888-54-2

Gulhane, Aditya Pradiprao (2022) Image Based Estimation of Food Colories Based on Machine Learning. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 169-180. ISBN 978-93-5547-989-1

Hamid1, Z. Abdel and Ibrahim, M. (2020) Preparation, Characterization, Performance of the Galvanized Steel Using Sn as Alloying Element to Promote the Corrosion Resistance. In: Emerging Trends in Engineering Research and Technology Vol. 9. B P International, pp. 108-122. ISBN 978-93-90206-37-7

Ilori, Abidemi Olujide and Uko, Charles Etim Akpan and Umoh, Ini Christopher (2022) Shear Strength Properties, and Bearing Capacity of Coastal Plain Sands in Uyo Metropolis, Akwa-Ibom State, Southeastern Nigeria. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 115-149. ISBN 978-93-5547-989-1

Laavanya, M. and Vijayaraghavan, V. (2020) Scientific Approach of Real Time Fake Currency Note Detection Using Deep Learning. In: Emerging Trends in Engineering Research and Technology Vol. 9. B P International, pp. 145-152. ISBN 978-93-90206-37-7

Mahantesh, N. B. (2021) Performance Evaluation of Reinforced Geopolymer Concrete as Earthquake Resistant Composite. In: New Approaches in Engineering Research Vol. 15. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 73-94. ISBN 978-93-5547-064-5

Mahesh, K. and Inbasakaran, S. and Lithesh, J. and Praveen, S. (2022) Industrial Automation of Gas Tunnel Kiln Using Relay Logics, PLC and VFD’s. In: Techniques and Innovation in Engineering Research Vol. 2. B P International, pp. 43-58. ISBN 978-93-5547-880-1

Mazahri, Bi Bi Zainab and Agsar, Dayanand and Prasad, M. V. N. Ambika (2020) Experimental Study on the Development of Paper Biosensor for the Detection of Phenol from Industrial Effluents Using Bioconjugate of Tyr-AuNps Mediated by Novel Isolate Streptomyces tuirus DBZ39. In: Emerging Trends in Engineering Research and Technology Vol. 9. B P International, pp. 133-144. ISBN 978-93-90206-37-7

Nwajuaku, I. I. and Okey-Onyesolu, C. F. and Chukwunonso, Okeke (2021) Improving Fish Production in a Locally-Designed Aquaculture System. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 43-49. ISBN 978-93-5547-358-5

Pasha, Md. M. (2021) Recent Study on Barker Coded Modulated Thermal Wave Imaging for Defect Detection of Glass Fiber Reinforced Plastic. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 119-128. ISBN 978-93-90888-73-3

Pavithra, S. and Kannan, P. Muthu (2020) An Approach on Symmetric Random Biometric Key (SRBK) Based Cryptography. In: Recent Developments in Engineering Research Vol. 3. B P International, pp. 156-170. ISBN 978-93-90206-97-1

Potrous, Saad M. (2022) Control of Pollutants in Crude Oil through Processing Oil Well Injection Water by Physical Methods: An Experimental Investigation. In: Techniques and Innovation in Engineering Research Vol. 4. B P International, pp. 102-114. ISBN 978-93-5547-989-1

Ragul, G. (2020) Critical Studies on Design, Analysis and Impact Behaviour of Magnesium Alloys (ZK60A) of Low Pressure Die Casting for Automotive Wheels by Finite Element Method. In: Emerging Trends in Engineering Research and Technology Vol. 9. B P International, pp. 123-132. ISBN 978-93-90206-37-7

Raharjo, Wahyu Purwo and Ariawan, Dody and Diharjo, Kuncoro and Raharjo, Wijang Wisnu and Kusharjanta, Bambang (2021) Fire Performance Enhancement of Natural-Fiber-Reinforced Polymer Composites. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 48-72. ISBN 978-93-5547-064-5

Ravikumar, M. and Mohanraj, T. and Venkatesan, D. (2021) An Advanced Study on Two Stroke Internal Combustion Engine to Enhance Clean Combustion by the Improved Method of the Airflow. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 137-159. ISBN 978-93-90888-73-3

Saidi, Imen and Bejaoui, Islem and Touati, Nahla (2021) Study on Nonlinear Internal Model Control Based Neural Networks: An Application to MIMO Non-Square Systems. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 24-34. ISBN Dr. Omveer Singh Novel Perspectives of Engineering Research Vol. 4 12 02 2021 12 02 2021 9789355473554 Book Publisher International (a part of SCIENCEDOMAIN International) 10.9734/bpi/nper/v4 https://stm.bookpi.org/NPER-V4/issue/view/490

Salmasi, Farzin and Abraham, John (2021) Validity of Schaffernak and Casagrande Analytical Solutions for Seepage through a Homogeneous Earth Dam and Comparison with Numerical Solutions Based on the Finite Element Method. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 79-93. ISBN 978-93-5547-358-5

Salmasi, Farzin F. and Abraham, John (2022) Determination of Stilling Basin Invert Elevation and Its Effect on Controlling Hydraulic Jumps. In: Techniques and Innovation in Engineering Research Vol. 2. B P International, pp. 59-82. ISBN 978-93-5547-880-1

Sawalakhe, Pranil V. and Gudadhe, Nitin P. (2021) Is Six Sigma an Appropriate Approach to Evaluate Performance of Testing Laboratories? In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 160-166. ISBN 978-93-90888-73-3

Schlosser, Tibor and Schlosser, Peter and Cápayová, Silvia and Hodáková, Dominika and Zuzulová, Andrea (2021) Study on Public Transport Modal Split as a Smart Growth Tool for New City Centre of Bratislava. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 50-78. ISBN 978-93-5547-358-5

Tenne, Yoel (2021) Investigation of RBF Hyperparameter Variation on Evolutionary Search. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 35-42. ISBN 978-93-5547-358-5

Trang, Huynh Nguyen Khanh and Tuyet, Hoang Thi Diem (2021) A Preliminary Case Report on Acute Fatty Liver of Pregnancy. In: Current Topics in Medicine and Medical Research Vol. 13. B P International, pp. 106-112. ISBN 978-93-90516-49-0

Velichkova, Rositsa (2021) Risk Assessment of Floods in Danube Region in Bulgaria. In: Advanced Aspects of Engineering Research Vol. 14. B P International, pp. 143-157. ISBN 978-93-91215-89-7

Venkatareddy, Prashanth and Prashanth, N. A. (2021) PID Gain Tuning for Robust Control of PMDC Motor with Tracking and Disturbance Rejection through H∞: A Recent Study. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 11-22. ISBN 978-93-5547-064-5

Weinand, Christian (2021) Rational Evaluation of Bone Grafts for Different Intraosseus and Heterotopic Implantations in Various Animal Models. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 23-37. ISBN 978-93-5547-064-5

Zatsepin, A. F. and Kuznetsova, Yu A. and Mashkovtsev, M. A. and Rychkov, V. N. (2021) Research on Interband Optical Transitions in Gd2O3: Er Nanoparticles – Prospective System for Energy Convertors. In: Advanced Aspects of Engineering Research Vol. 8. B P International, pp. 129-136. ISBN 978-93-90888-73-3

Book

Parashar, Dr. Ashish Kumar (2022) Fluid Mechanics Lab Manual. B P International. ISBN 978-93-5547-665-4